Airflow / Luftfluss für AKCP Rack Monitoring - Serverraumübwerwachung Lösungen

The Airflow sensor is placed in the path of the air stream, where the user can monitor the status and the amount of the flowing air. The sensorProbe displays this information using a graphical display via its web interface. In addition to an on/off indication, it also graphs the analog values over a period of time. If, for example, the fan slows down the user will be give an indication of change over time. This may happen if the fan close to failure or the air filter is clogged.

In addition to a web interface an SNMP interface is provided for alarm/normal status and to get the current analog value. SNMP traps sent when critical. SNMP polling via get available. Web browser interface available. When an alarm condition is activated the description and location of the fault can be sent via email, page.

Specifications & Features:

On/off alarm signal of airflow
Airflow data graphically displayed of over time
Accurate, cost effective flow sensing
Operates from a single +5 V DC Power Supply which powered by the sensorProbe
2 LEDs indicate the status of Airflow and that the sensor is securely plugged into the sensorProbe
Electronics mounted in a small plastic case
Sensor type - open/closed contact switch
Power source: powered by the sensorProbe. No additional power needed.
sensorProbe autodetects the presence of the airflow sensor
Up to 2 airflow sensors per sensorProbe2, 8 per sensorProbe8 and cameraProbe8
Full autosense including disconnect alarm
Data graphically displayed via a web page
Data collection: via network management
Measurement rate: one reading each second, data logging once per minute
Sensor type: Thermistor
Sensor power: line power from sensorProbe
Communication cable: RJ-45 jack to sensorProbe
Trap information:Warning sensor number,Sensor description, Airflow (%)
Ambient range: -20°C to 85° C